Home  

VGA Distributor
Model: VGD125K

 

TX: FrontTX: Rear RX
 
Features:
  • Each kit includes one piece VGD125K VGA-T transmitter and one piece VGR110 receiver. Additional receivers are sold separately.
  • VGD125K is designed for long range VGA distribution over cost effective CAT5 UTP cable.
  • One or multi video input/output, with one VGA LOOP output (VGA cable) for local side. Others are RJ-45 output (CAT5 UTP cable) at remote side.
  • All of the built-in amplifiers are for long range VGA signal transmissions that can range up to 1000Ft / 300M when working with VGR110 VGA receiver at remote side.
  • Dual output: 1 VGA loop output for local, plus 4 x CAT5 RJ45 output for remote side.
  • Each VGA display equipment requires one VGR110 receiver at remote side (Order separately).
  • Built-in contrast, brightness adjustment at VGR-110 Receiver.
  • Supports up to 1600x1200 @ 85Hz.
  • Use CAT5 cable instead of VGA cable.
  • Long range transmission up to 1000Ft / 300M.
  • Ideal for classroom video distribution, lecture halls, retail kiosks, video information displays, overhead projector systems, PC-training systems, and tradeshows PC demo systems.
  • Power supply included.
 
Application Diagram:

VGD125K

Panel View:
VGD125K VGA-T
VGR110

Specification:
Model Number
VGD125K VGA-T
VGR110
Resolution
Up to 1600 x 1200 @ 85Hz
Transmission Distance
Up to 1000 Ft / 300M
Video Amplifier Bandwidth
150MHz
Video Input Signals
RGB Analog (75Ω, 0.7Vp-p)
Sync Signal H/V Separated (TTL)
Horizontal Frequency Range
30-95KHz
Vertical Frequency Range
50-180Hz
VGA Connector
15-pin Mini D-Sub (High Density)
Link Connector
4 x RJ45
Power
5V DC 500mA
5V DC 500mA (External)
Power Consumption
400mA (Max)
250mA (Max)
Temperature
Operation: 0~55°C, Storage: -20~85°C,
Humidity: up to 95%
Dimensions W x H x D mm
57.5 x 67 x 27mm
67 x 27 x 140mm

C-TICK

OKINA USA Cabling Systems and Solutions provides an answer for all your cabling needs. Our complete line of baluns allows you to easily extend your current audio/video/data system up to 1200ft and even up to 8000 ft, with an active balun.

OKINA USA Baluns are perfectly suited for applications such as these:
CCTV Security Systems
CCTV Surveillance Systems
CCTV Cameras
Home Theatre
LCD/CRT Monitors
Televisions
VGA Monitors
DVD Players
PCs (Personal Computers)
Laptops/Notebooks
USB and PS/2 Devices
UTP (Unshielded Twisted Pair Cable)
BNC (Coaxial Cable)

How does a balun work?
Baluns are used to convert between "Balanced and Unbalanced" electrical signals.
Baluns work by transforming the original unbalanced (video/power/data/etc) signal to a balanced frequency used by a different cable, like CAT5 UTP. Not only does this reduce interference, but it also allows you to transmit a signal much longer than the original application would allow. Baluns are always utilized in pairs. One balun is needed to convert the original signal to a new frequency, and another balun is used at the other end to revert to the original frequency.

"Passive" Video Baluns do not require power, and can extend a signal up to 2000ft (B/W)
"Active" Video Baluns require power, but can extend a signal up to 8000ft (B/W)