Home   Passive Video Balun with Power Connector
Model: VBU110TK = VBU110TM + VBU110TF as a Kit
VBU110TM = Male Only
VBU110TF = Female Only
 

  VBU110TM - Male
For Camera Side

VBU110TF - Female
For Using Single Power Adaptor
 
Features:
  • Uses an Unshielded Twisted Pair cable (UTP), like CAT5, to transmit full motion camera video signal in color up to 1000ft / 300m, and in B/W up to 2000ft / 600m.
  • No power required for video balun
  • Surge / Lightning Protection
    10/700 μs Pulses: 2KV
    Standard: IEC61000-4-5
  • ESD : Electrostatic Discharge Protection
     Contact Discharge: 6KV / Air Discharge: 8KV
    Standard: IEC61000-4-2
  • Wave / Interference Rejection & Noise Filter
     Built-in Filter: 0~6HMz with Extra Interference Rejection <60db
  • DC Power Lead: 12V~24V DC
 
Application Diagram:
The distance shown is for video signal only. Refer to back page for Voltage Drop List.
VBU110TK
VBU110TM

Panel View:

Power +
Power -

Video +
Video -

 x3 Conductors
x3 Conductors

x1 Conductor
x1 Conductor


CAT5e is 24 Gauge for each Conductor. If you put 3 Conductors together, it will be Similar to 18~20 Gauge. This will be less for the Power Drop.

Specification:
Model Number
VBU110TK
Video Input / Output
BNC male cable & DC male/female to RJ45 modular jack
Surge / Lightning Protections Video Output Protection
2KV (common mode), 10/700µs
IEC6100-4 2/1955 (GB/T 1726, 5-1999)
Video Input Protection
2KV (different mode), 2KV (common mode)
IEC6100-4 2/1955 (GB/T 1726, 5-1999)
Video Input Protection for Over Current
100mA
Electrostatic Discharge Protection (ESD)
Contact Discharge: 6KV / Air Discharge: 8KV
Standard: IEC61000-4-2
Wave / Interference Rejection &
Noise Filter Protection
Built-in Filter: 0~6HMz with Extra Interference Rejection <60db
Video Signal
1V p-p, 75 Ohms
Transmission Distance
Color 1000ft / 300m / B/W 2000ft / 600m
Cable
UTP / Twisted Pair CAT5 (AWG24)
DC Power Lead
12V~24V DC

Voltage Drop According to Cable Length (24AWG):
Transmission Distance
Transmission Voltage
(12V DC, 0.5A)
Transmission Voltage
(12V DC, 1A)
Transmission Voltage
(12V DC, 1.5A)
160ft / 50m
13.5V
15.5V
17.0V
320ft / 100m
15.5V
18.5V
22.0V
500ft / 150m
17.0V
22.0V
27.0V
650ft / 200m
18.5V
25.5V
32.0V

RoHS   C-TICK
A-3, A-3a, A-3b

OKINA USA Cabling Systems and Solutions provides an answer for all your cabling needs. Our complete line of baluns allows you to easily extend your current audio/video/data system up to 1200ft and even up to 8000 ft, with an active balun.

OKINA USA Baluns are perfectly suited for applications such as these:
CCTV Security Systems
CCTV Surveillance Systems
CCTV Cameras
Home Theatre
LCD/CRT Monitors
Televisions
VGA Monitors
DVD Players
PCs (Personal Computers)
Laptops/Notebooks
USB and PS/2 Devices
UTP (Unshielded Twisted Pair Cable)
BNC (Coaxial Cable)

How does a balun work?
Baluns are used to convert between "Balanced and Unbalanced" electrical signals.
Baluns work by transforming the original unbalanced (video/power/data/etc) signal to a balanced frequency used by a different cable, like CAT5 UTP. Not only does this reduce interference, but it also allows you to transmit a signal much longer than the original application would allow. Baluns are always utilized in pairs. One balun is needed to convert the original signal to a new frequency, and another balun is used at the other end to revert to the original frequency.

"Passive" Video Baluns do not require power, and can extend a signal up to 2000ft (B/W)
"Active" Video Baluns require power, but can extend a signal up to 8000ft (B/W)