Audio Balun
Model: AB100T
- Twisted pair Audio Ground Loop Isolator.
- RCA female to 2 pin screw terminal.
- 20Hz to 20 KHz Bandwidth.
- Available for 75~120ohm cable.
- Hi Performance to eliminate the audio ground loops interference.
| |
Audio Balun |
|
|
| Features: | |
|
|
| Application Diagram: | |
|
|
|
| Model Number | AB100T |
| AUDIO INPUT (RCA Connector) | 1 |
| AUDIO INPUT | 2V p-p, 75 Ohms |
| TRANSMISSION DISTANCE | 1000Ft / 300 meters |
| RJ-45 OUTPUT | Terminal |
| CABLE FOR RJ-45 | UTP/ Twisted Pair CAT5 (AWG24) |
| DIMENSIONS W x H x D mm | 58 x 25 x 22 |
C-TICK
OKINA USA Cabling Systems and Solutions provides an answer for all your cabling needs. Our complete line of baluns allows you to easily extend your current audio/video/data system up to 1200ft and even up to 8000 ft, with an active balun.
OKINA USA Baluns are perfectly suited for applications such as these:
CCTV Security Systems
CCTV Surveillance Systems
CCTV Cameras
Home Theatre
LCD/CRT Monitors
Televisions
VGA Monitors
DVD Players
PCs (Personal Computers)
Laptops/Notebooks
USB and PS/2 Devices
UTP (Unshielded Twisted Pair Cable)
BNC (Coaxial Cable)
How does a balun work?
Baluns are used to convert between "Balanced and Unbalanced" electrical signals.
Baluns work by transforming the original unbalanced (video/power/data/etc) signal to a balanced frequency used by a different cable, like CAT5 UTP. Not only does this reduce interference, but it also allows you to transmit a signal much longer than the original application would allow. Baluns are always utilized in pairs. One balun is needed to convert the original signal to a new frequency, and another balun is used at the other end to revert to the original frequency.
"Passive" Video Baluns do not require power, and can extend a signal up to 2000ft (B/W)
"Active" Video Baluns require power, but can extend a signal up to 8000ft (B/W)