Keyboard Video Mouse Extender Model: VKMPU1000
	Host Unit - TxRemote Unit - Rx
The OK-VKMPU1000 extender includes a host unit and a remote unit which are connected by standard UTP CAT5 cable. The host unit receives one channel VGA video and one pair of PS2 keyboard and mouse signals from the PC through combined cable using DVI interface. It provides one local VGA, KM outputs and one channel UTP output for transmission. The unit is powered through USB. On the remote side, the remote unit receives one channel of UTP signal, and provides one port VGA output and one set of PS2 outputs for keyboard and mouse. The video quality can be adjusted manually with the built-in brightness and contrast adjustors with a resolution of up to 1600x1200 @ 60Hz for 500ft / 150m.
Features:
Transmission distance of up to 1000ft / 300m. Transmission via UTP CAT5/5e Extends VGA video, keyboard and mouse signals Real-time transmission Built-in brightness and contrast adjustors Power through USB in host unit and 12V DC only in remote unit High video resolution depends on the length and quality of UTP cable with standard resolution 1024x768 and up to 1600x1200 @ 60Hz. Exceptional interference rejection Built-in transient protection Multiplatform support: supports PC, Mac, Sun, and Linux systems. Supports VGA, SVGA, XGA, SXGA and Multi-sync monitors. OS Support: Windows 2000, Windows XP, Linux, Mac and Sun
Application Diagram:
VKMPU1000 Max. Distance via CAT5 Cable Hz 800x600 pixels 1148ft / 350m 60Hz 1024x768 pixels 1000ft / 300m 60Hz 1280x1024 pixels 650ft / 200m 60Hz 1600x1200 pixels 500ft / 150m 60Hz

Panel View:
Front				Front
Rear				Rear
	Host Unit - TxRemote Unit - Rx

C-TICK

OKINA USA Cabling Systems and Solutions provides an answer for all your cabling needs. Our complete line of baluns allows you to easily extend your current audio/video/data system up to 1200ft and even up to 8000 ft, with an active balun.

OKINA USA Baluns are perfectly suited for applications such as these:
CCTV Security Systems
CCTV Surveillance Systems
CCTV Cameras
Home Theatre
LCD/CRT Monitors
Televisions
VGA Monitors
DVD Players
PCs (Personal Computers)
Laptops/Notebooks
USB and PS/2 Devices
UTP (Unshielded Twisted Pair Cable)
BNC (Coaxial Cable)

How does a balun work?
Baluns are used to convert between "Balanced and Unbalanced" electrical signals.
Baluns work by transforming the original unbalanced (video/power/data/etc) signal to a balanced frequency used by a different cable, like CAT5 UTP. Not only does this reduce interference, but it also allows you to transmit a signal much longer than the original application would allow. Baluns are always utilized in pairs. One balun is needed to convert the original signal to a new frequency, and another balun is used at the other end to revert to the original frequency.

"Passive" Video Baluns do not require power, and can extend a signal up to 2000ft (B/W)
"Active" Video Baluns require power, but can extend a signal up to 8000ft (B/W)